Product Reviews

Silkland DP80 DisplayPort Cable Review: Short 80Gbps Link for High-Refresh Setups

A compact DisplayPort cable for gamers connecting nearby DP 2.1 displays and graphics cards, especially when high refresh rates matter.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

This Silkland DP80 DisplayPort Cable review looks at a short, VESA-certified cable built for high-bandwidth links between a gaming PC and monitor.

Its 1.6-foot length suits nearby components and tidy desk layouts, but leaves little room for a distant tower or flexible monitor placement.

Silkland DP80 Cable Review Summary

The quick verdict

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A compact DisplayPort cable for gamers connecting nearby DP 2.1 displays and graphics cards, especially when high refresh rates matter.

  • VESA-certified DisplayPort 2.1 cable rated for 80Gbps and compatible with UHBR20.
  • Uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; listed higher modes use DSC, including up to 16K at 60Hz.
  • Supports Dynamic HDR10+, 3D, HDCP 2.3, and 7.1, 5.1, or 2.0 uncompressed audio pass-through.
  • Gaming features include VRR, FEC, ALLM, DSC 1.2a, and MST for multi-monitor setups.

Pros

  • High 80Gbps bandwidth rating targets demanding DisplayPort 2.1 gaming configurations.
  • The short length can help keep a nearby PC-to-monitor connection compact.

Consider before buying

  • At 1.6 feet, it is too short for many under-desk PC placements or longer cable routes.
  • The highest resolution and refresh combinations depend on DSC and compatible graphics card and monitor support.
Read the full review summary

The DP80 combines a short run with an 80Gbps DisplayPort 2.1 connection, VESA certification, and support for high-refresh resolutions.

Silkland lists uncompressed support up to 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; higher combinations, including up to 16K at 60Hz, are specified with DSC enabled.

Those are capability ceilings, not guarantees for every setup: the graphics card, monitor, and settings must also support the desired mode.

This is most appealing for a compact gaming setup where the computer sits close to a DisplayPort monitor and the owner wants a cable rated for newer hardware.

Backward compatibility with DP 2.0 and DP 1.4 can also make it useful with existing equipment, though the connected devices determine the features and resolution available.

Its no-latch plugs, gold-plated connectors, tinned copper conductors, triple shielding, and nylon exterior emphasize connection convenience and a durable physical design.

The buying factors

Silkland DP80 Cable Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Bandwidth headroom

An 80Gbps rating and UHBR20 support target high-bandwidth DisplayPort 2.1 setups.

9/10

High-refresh gaming support

Listed modes include uncompressed 4K at 240Hz and 2K at 540Hz, with higher modes using DSC.

4/10

Setup flexibility

The 1.6-foot length is convenient for close connections but restricts routing distance.

8/10

Connector convenience

The no-latch plug design avoids a release mechanism when disconnecting the cable.

8/10

Construction features

Tinned copper, triple shielding, gold-plated connectors, and a nylon exterior are useful design choices.

7/10

Compatibility clarity

It supports DP 2.0 and DP 1.4 devices, while maximum modes depend on both connected devices.

Key Features and Specifications of Silkland DP80 Cable

  • VESA-certified DisplayPort 2.1 cable rated for 80Gbps and compatible with UHBR20.
  • Uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; listed higher modes use DSC, including up to 16K at 60Hz.
  • Supports Dynamic HDR10+, 3D, HDCP 2.3, and 7.1, 5.1, or 2.0 uncompressed audio pass-through.
  • Gaming features include VRR, FEC, ALLM, DSC 1.2a, and MST for multi-monitor setups.
  • Backward compatible with DisplayPort 2.0 and 1.4; male-to-male DisplayPort connectors suit DP-equipped graphics cards and monitors.
  • The 1.6-foot cable has no-latch connectors, 24K gold plating, 28AWG tinned copper conductors, triple shielding, and a nylon exterior.

Pros and Cons of Silkland DP80 Cable

Pros

  • High 80Gbps bandwidth rating targets demanding DisplayPort 2.1 gaming configurations.
  • The short length can help keep a nearby PC-to-monitor connection compact.
  • No-latch plugs are straightforward to connect and remove.
  • Triple shielding and a nylon exterior add practical construction features for a frequently handled cable.

Consider before buying

  • At 1.6 feet, it is too short for many under-desk PC placements or longer cable routes.
  • The highest resolution and refresh combinations depend on DSC and compatible graphics card and monitor support.
  • Its DisplayPort-to-DisplayPort design is not the right fit for a source or display that relies on another connector type.

Who Should Buy Silkland DP80 Cable?

Good fit

Consider the Silkland DP80 Cable if your PC and monitor are close together and both have DisplayPort connections.

Its short run can suit a compact desk, a monitor mounted near the computer, or a setup where extra cable would create clutter.

The 80Gbps rating and UHBR20 support give it room for high-bandwidth modes when the rest of the system can use them.

Before buying, check the exact resolution and refresh rate your graphics card and monitor support, and whether the target mode requires DSC.

Also measure the route between ports, allowing enough slack for the cable to reach without pulling at the connectors. The 1.6-foot length makes that check especially important.

The cable's backward compatibility can suit older DisplayPort equipment, while features such as VRR, MST, and HDR support may be useful in compatible setups.

Treat these as system-level possibilities: each connected device and its configuration affect which functions are available.

Who should skip it

Skip this model if the computer is several feet from the monitor or you need slack for a moving display. A longer cable is a more practical fit for that layout.

Look elsewhere if either device lacks a DisplayPort port, or if you need a cable that connects unlike port types.

For a high-refresh target, confirm that both devices support the requested mode before choosing a cable based on its maximum rating.

What the Silkland DP80 Cable Means for a Gaming Setup

Bandwidth and refresh-rate headroom

The 80Gbps rating and UHBR20 support are aimed at high-bandwidth DisplayPort 2.1 use. Silkland lists uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz, plus higher combinations with DSC.

The practical takeaway is to match the cable’s rating to the modes supported by the source and display rather than assuming the cable alone determines output.

A genuinely short cable run

At 1.6 feet, this cable makes the most sense when the PC sits close to the monitor. A short connection can keep a compact desk less cluttered, but offers little routing freedom.

Measure the full path from port to port and account for bends and movement before deciding it will reach.

Construction and plug design

The cable uses 28AWG tinned copper, triple shielding, 24K gold-plated connectors, and a nylon exterior. These are design details relevant to shielding and everyday handling, but they do not establish a particular measured lifespan.

The plugs omit a latch, which may simplify removal when the connection is accessible.

Features depend on the whole system

VRR, ALLM, FEC, DSC 1.2a, MST, HDR10+, and audio pass-through broaden the features this cable is designed to support. Their usefulness depends on compatible devices, settings, and, for multi-monitor use, a suitable system configuration.

If a specific feature is central to your setup, check that the graphics card and monitor both support it.

Alternatives to Silkland DP80 Cable

One useful alternative is included because the supplied option differs mainly in length and bandwidth, giving buyers a meaningful choice for nearby versus farther-apart devices.

Computer DisplayPort Cables alternative

Silkland 54Gbps 16K DisplayPort Cable, 10 ft
4.6/5

7,000+ ratings

Read Amazon Reviews

Silkland 54Gbps 16K DisplayPort Cable, 10 ft

Choose the DP80 when the PC and monitor are close and you want its higher bandwidth rating. The 10-foot 54Gbps model is a more practical match when routing distance matters more and its listed capabilities suit your display.

  • This Silkland cable is 10 feet long and rated for 54Gbps. Its listed modes include 4K at 240Hz and 8K at 120Hz, with 16K at 60Hz using DSC.
  • The DP80 is a 1.6-foot cable rated for 80Gbps, with listed uncompressed support up to 4K at 240Hz and 2K at 540Hz.

Is Silkland DP80 Cable Worth It?

The Silkland DP80 Cable is worth considering for a close-range gaming setup that uses DisplayPort and can benefit from an 80Gbps cable.

Its no-latch connectors and shielding-focused construction add practical appeal, while the short 1.6-foot run sharply limits where it can be installed.

Check device compatibility and measure the route before ordering, especially if you want a specific high-refresh mode or need room to move the monitor.

If the cable reaches comfortably and both devices support the target features, the DP80 is a focused option for a compact, high-bandwidth connection.

Your review at a glance

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A compact DisplayPort cable for gamers connecting nearby DP 2.1 displays and graphics cards, especially when high refresh rates matter.

  • VESA-certified DisplayPort 2.1 cable rated for 80Gbps and compatible with UHBR20.
  • Uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; listed higher modes use DSC, including up to 16K at 60Hz.
  • Supports Dynamic HDR10+, 3D, HDCP 2.3, and 7.1, 5.1, or 2.0 uncompressed audio pass-through.
  • Gaming features include VRR, FEC, ALLM, DSC 1.2a, and MST for multi-monitor setups.

Written by

fasalaska.com Editorial Team

Editorial team

fasalaska.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Silkland DP80 DisplayPort Cable

Silkland DP80 DisplayPort Cable

A compact DisplayPort cable for gamers connecting nearby DP 2.1 displays and graphics cards, especially when high refresh rates matter.

  • VESA-certified DisplayPort 2.1 cable rated for 80Gbps and compatible with UHBR20.
  • Uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; listed higher modes use DSC, including up to 16K at 60Hz.
Check Video Reviews on Amazon